RD-360LG 360kV Portable Industrial X-ray Flaw Detector 80mm Steel NDT X Ray Equipment

RD-360LG 360kV Portable Industrial X-ray Flaw Detector

The RD-360LG is a 200–360 kVp constant-potential portable industrial X-ray flaw detector engineered for thick-section radiography where 250 kV class equipment runs out of power. As a complete NDT X Ray Equipment set it combines a SF6 gas-insulated 360 kV X-ray generator, a MIXN intelligent controller, power and control cables and a spare parts kit in one export case. In the LGD configuration the system penetrates 80 mm of A3 steel in a 30-minute exposure at 600 mm focal distance; the LGP configuration replaces the directional head with a 360° panoramic beam so a full pipeline girth weld is captured in a single shot. Both heads share the same controller, which lets a service company or distributor cover plate, casting and pipeline radiography with one platform instead of three.

Why Buyers Specify the RD-360LG

• 360 kV constant potential output – 5 mA tube current with ±1% mA stability, so film density stays repeatable on 60–80 mm sections where lower-voltage units need multiple exposures.
• One controller, two tube heads – switch between LGD directional radiography and LGP panoramic pipeline work without buying a second control system.
• 80 mm A3 steel penetration – verified at 600 mm focal length with Agfa film, double lead-foil intensification, 22°C developer and density ≥1.5.
• SF6 gas insulation with anode-grounded radiator – strong forced-air cooling sustains the 3:1 duty cycle and 30 minutes of continuous exposure per cycle.
• Fully automatic training – the controller steps the kV up by itself after 48 hours idle and backs off automatically on discharge, protecting tube life without a specialist high-voltage operator.
• Soft start and slow shutdown – every exposure ramps the generator gently, which is the main cause of premature tube failure on high-voltage portable units.
• Safety and protection built in – lead-door interlock terminals with “SD” alarm, over-temperature “HT” shutdown, mA and kV over/under-range protection, discharge detection.
• Field-serviceable design – detachable cooling fan for dust cleaning, rubber shock-absorbing corner guards, internal-buckle top cover, side status lights, cumulative exposure-time recorder and adjustable delayed exposure.
• Wide-input controller – AC 120–265 V, ≥3 kW, DC 100–240 V output, so the same controller serves 110 V and 230 V markets with the correct generator pairing.

LGD or LGP: Choosing the Right Tube Head

Technical Specifications

MIXN Intelligent Controller

Applications by Industry

Standard Scope of Supply

Packing, Delivery and Documents

Quality Control Before Shipment

• Every tube head is filled, pressure-tested to 0.4–0.5 MPa and held for leak verification before packing.
• High-voltage training and discharge conditioning are performed on the matched controller, with the exposure record logged by serial number.
• Radiation leakage, mA stability and kV calibration are checked against the factory specification sheet supplied with the unit.
• Production follows an ISO 9001 quality system; CE marked models are available for European and CIS markets.

Company Introduction

Hangzhou Huiwei Nondestructive Testing Equipment Co., Ltd. (HUIWEI DETECTION) designs and builds industrial X-ray inspection equipment at its plant in Yuhang District, Hangzhou, Zhejiang Province, China. The range covers portable X-ray flaw detectors and controllers from 160 kVp to 360 kVp, X-ray flat panel detectors, film processors, magnetic particle yokes, ultrasonic instruments and NDT accessories. With more than a decade of production experience, in-house gas filling and high-voltage test facilities and a spare parts stock covering a ten-year service window, HUIWEI supplies inspection companies, pipeline contractors, shipyards, foundries, refineries and equipment distributors in over 60 countries. Distributors are supported with OEM labelling, English technical documentation, online commissioning training and joint exhibition promotion.

RD-360LG generator and MIXN controller set ready for dispatch

Anode-grounded radiator and forced-air fan on the tube head

HUIWEI production facility, Yuhang District, Hangzhou: tube head assembly, SF6 gas filling and high-voltage test bays.

Address: No. 3 Miaochangqiao Road, Liangzhu Street, Yuhang District, Hangzhou, Zhejiang, China. Telephone: +86 571-88754564.

Distributor Programme

Frequently Asked Questions

How to Get the Right Configuration

Send us the material type, maximum wall thickness, joint geometry (plate seam or circumferential pipe), inspection standard and country of destination. We will confirm within one working day whether the LGD directional or LGP panoramic head fits the work, list the matching accessories and quote the best price for your order volume.