Nondestructive Testing 250kv/300kv/350kv High Frequence High Voltage Industrial Portable X-ray NDT Machine Inspection machine
Main introduction:
The RD-2505 is the designated non-destructive testing product for the installation of China's first 1 million KW power generation unit, and has withstood the test of time. It features technological breakthroughs, high voltage, and short exposure time, proven performance with 10,000 images taken in 30 days. Small and lightweight, with strong penetration, it is shock and impact resistant and suitable for filming in large power generation unit installations, shipyards, and other high-altitude, confined spaces. Its small size, light weight, portability, time and labor saving, high stability, low failure rate, and continuous exposure operation without 1:1 breaks improve filming efficiency by 50%. This series of equipment is available in directional and circumferential versions, with a maximum penetration thickness of 45mm in A3 steel.
RD-2505 is an X-ray machine with automatic intelligent training machine control system. Its biggest feature is its high intensity anti-interference ability. Its working mode is continuous 4:1 working exposure, and the maximum exposure time is 15 minutes. This series of models is divided into directional and circumferential radiation models. The radiation angle of the directional machine is 40 ± 5 °, the circumferential radiation angle is 360 °, and the maximum penetration of A3 steel thickness is 45mm.
This model is a classic model for field and aerial operations with small size, light weight (generator weight 26kg), strong penetration ability and high stability.
Main uses:
RD-2505 the technical parameters
|
|
Project
|
RD-2505
|
|
input
|
Input power
|
Single-phase 50Hz AC220V - 265V
|
|
|
Power supply capacity
|
No less than 2.0 KVA
|
|
output
|
X - ray tube voltage
|
150~ 250 KVp
|
|
|
X ray tube current
|
5mA
|
|
|
mA Stability degree
|
± 1%
|
|
Ray tube
|
Focal size
|
2.0× 2.0
|
|
|
X-ray irradiation range
|
40±5°
|
|
Ray generator
|
working pressure
Cooling mode
Insulation way
|
0.45MPa ~ 0.5Mpa
Anode ground connection radiator Strong wind cold
Gas insulation SF6
|
|
|
Size
weight (kg)
|
Φ280×610
|
|
|
|
26
|
|
Maximum penetration
|
Thickness steel A3(mm)
|
40 mmFe(5 min)
|
|
|
condition
|
focal distance 600mm ,Agfa film,Double lead foil,Liquid temperature 22,Film density ≥1.5
|
|
|
sensitivity
|
superior 2%
|
|
controller
|
Size
weight
Circuit
|
325×270×180
< 9(kg)
Automatic control and protection
|
|
Environment
|
working temperature relative humidity
Altitude
|
-30°~ +40°
Not more than 85%
Not higher 1500m
|
|
methods
|
fully automatic 4:1 Work and rest,Longest continuous exposure time 15mins
|
FAQ
1. Is your Company the Manufacturer or a Trading Company?
We are a manufacturer of NDT x ray equipment in China with experience engineer working over 30 years.
2. What's the MOQ ?
(1). Normally, MOQ is 1 piece. The quantity is depending on the clients’ needs.
(2)According to customer order, the quantity still can be negotiated and we will product immeditaly if we dont have stock.
3. What is your principle for the samples ?
No free samples. But we provide 1piece as a sample order for all items.
Por favor verifique seu email!
