Digital X Ray Machine Used In The Manufacturing And Aerospace Industries RD-3005
The RD-3005 is a compact, lightweight, and portable industrial X-ray flaw detector featuring strong penetration, time-saving, labor-saving, and highly stable performance, along with a low failure rate. It can operate continuously for 15 minutes without a 1:1 rest period. It is suitable for single-image radiography of double-walled chemical spherical tanks and large-diameter pipelines, improving work efficiency by 50%. The device is lightweight, with a generator weight of only 34 kg and a sophisticated design. This series of devices is available in directional and circumferential formats, with a maximum penetration of 50 mm thick Q235 steel.
RD-3005the technical parameters
|
|
Project |
RD-3005 |
|
input |
Input power |
Single-phase AC150-250V 50/60Hz |
|
Power supply capacity |
No less than 3.0 KVA |
|
|
output |
X - ray tube voltage |
150~ 300 KVp |
|
X ray tube current |
5mA |
|
|
mA Stability degree |
± 1% |
|
|
Ray tube |
Focal size |
2.5× 2.5 |
|
X-ray irradiation range |
40±5° |
|
|
Ray generator |
working pressure Cooling mode Insulation way |
0.35MPa ~ 0.5Mpa Anode ground connection radiator Strong wind cold Gas insulation SF6 |
|
Size weight (kg) |
φ320×640 |
|
|
34 |
||
|
Maximum penetration |
Thickness steel A3(mm) |
50 mmFe(5 min) |
|
condition |
focal distance 600mm ,Agfa film,Double lead foil,Liquid temperature 22,Film density ≥1.5 |
|
|
|
sensitivity |
superior 2% |
|
controller |
Size weight Circuit |
325×270×180 < 9(kg) Automatic control and protection |
|
Environment |
working temperature relative humidity Altitude |
-30°~ +40° Not more than 85% Not higher 1500m |
|
methods |
fully automatic 4:1 Work and rest,Longest continuous exposure time 15mins |
|
